Shift Capture
Boundary scan instruction register loading sequences shift predefined bit patterns into instruction shift paths to verify scan chain continuity prior to instruction decoding. Entering the capture-IR controller state loads a fixed binary pattern into the instruction shift register before shifting new opcode bits into the test access port. The captured pattern contains a fixed binary pattern ending in zero one.
Downstream automated test equipment reads this captured pattern to confirm continuous clock and data connectivity through target integrated circuits.
Pattern Verification
Test access port controllers execute state transitions synchronized with test clock rising edges during boundary scan execution. While residing in the capture-IR state, internal parallel instruction registers remain unaffected while shift stages capture status bit codes. Open trace faults, ground shorts, or stuck-at logic conditions along the serial instruction path alter the captured bit sequence.
Shifted patterns flow out through the test data output pin during subsequent shift operations for real-time comparison against expected boundary scan description language definitions. Diagnostic software identifies physical interconnect failures by evaluating discrepancies in the captured instruction shift stream. Circuit assembly verification requires complete scan chain integrity before executing complex structural board diagnostics.
Proper instruction capture prevents invalid instruction codes from entering active parallel registers during state transitions.
Transition Synchronization
Controller transitions away from instruction capture states rely on controlled state machine sequencing. Leaving capture-IR occurs on the falling edge of the test clock signal when moving into shift or exit states. Timing violations during this state transition corrupt captured instruction bits and disrupt test logic sequencing.
Physical inspection tools verify test clock edge rates to prevent false state transitions.