Fatigue Relation
An empirical power law relates plastic strain amplitude to the number of load reversals sustained before low-cycle fatigue failure occurs in metallic structures. Formulated for metals under cyclic mechanical stress, the coffin-manson relation models thermal fatigue in soldered electrical assemblies by treating temperature swings as cyclic plastic deformation. The formulation calculates cycles to failure from plastic shear strain range and an empirical ductility exponent characteristic of the solder alloy.
Its scope applies exclusively to plastic strain dominance, terminating where elastic strain controls high-cycle vibration fatigue governed by Basquin formulations.
Thermal Cycling
Differences in thermal expansion coefficients between silicon components and organic substrate laminates impose cyclic shear stresses across solder joints during operating temperature swings. During thermal dwell periods, solder alloys undergo creep and stress relaxation that convert elastic deformation into cumulative plastic shear strain. Reliability engineers apply the model to accelerated thermal cycling data from test chambers running profiles between minus forty degrees Celsius and one hundred twenty-five degrees Celsius.
The resulting acceleration factors translate laboratory failure rates into predicted field lifetimes for automotive and aerospace circuit assemblies. Solder compositions alter the ductility exponent markedly, requiring separate calibrations for traditional tin-lead eutectics and near-eutectic tin-silver-copper alloys. Under thermal shock conditions with steep transition ramps, thermal gradients generate transient stresses that exceed standard isothermal creep assumptions.
Acceptance verification under IPC-9701 relies on these predictive calculations to establish sample sizes and test duration targets for qualification testing.
Frequency Factor
Modified formulations incorporate cyclic frequency and peak dwell temperature to account for time-dependent creep and oxidation kinetics. Without frequency corrections, low-cycle predictions overestimate fatigue resistance during long operational dwell times. The empirical relationship breaks down when intermetallic compound growth shifts the failure mode from bulk solder shear to brittle interfacial fracture.