Destructive Verification
Destructive metallurgical cross-sectional evaluation extracts small sacrificial specimens from printed circuit board manufacturing panels to confirm subsurface layer registration, copper barrel integrity and internal dielectric spacing under optical magnification. Fabricators position the coupon microsection within the panel perimeter rails to undergo identical drilling, desmear, copper plating and solder mask chemical sequences as the deliverable production boards. The destructive inspection terminates at the coupon perimeter and does not evaluate non-sacrificial conductor traces situated within the deliverable board outline.
Preparation Protocol
Precision diamond saws excise the test coupon from the finished production panel before laboratory technicians mount the extracted sample vertically within a cold-curing liquid epoxy or acrylic resin puck. Successive grinding steps using silicon carbide abrasive papers down to fine grit thresholds bring the observation plane directly to the vertical centerline of target plated through-holes. Diamond suspension polishing cloths remove surface scratches to produce an unblemished reflective metallurgical finish.
Chemical etching with ammonium persulfate or copper chloride reagents highlights grain boundaries, internal plating interfaces and electroless copper seed layers. Through this rigorous physical preparation, coupon microsection samples expose barrel plating thinning, knee cracks, resin recession and inner layer interconnect separation. Optical metallographs capture high-magnification micrographs under polarized illumination to document wall thicknesses alongside void diameters.
Inspection Standard
Acceptance criteria defined by IPC-6012 dictate plating thickness limits, barrel void allowances and inner layer interconnect separation thresholds across different fabrication classes. Class three high-reliability criteria mandate an average copper barrel thickness of twenty-five micrometers with no single spot falling below twenty micrometers. Fabricators reject production lots whenever an isolated cross-section reveals copper cracking at the inner layer interface or resin smear blocking an internal pad junction.
Coupon microsection testing provides conclusive physical evidence of structural barrel soundness throughout thermal shock and solder float simulations.