Impedance Boundary
Circuit components placed at the ends of transmission lines prevent signal reflections by matching the characteristic impedance of the trace to the load. Effective edge termination ensures that high speed digital signals do not bounce back from the end of the line and interfere with incoming data pulses. This practice is essential for maintaining signal integrity in designs with fast rise times.
Implementation Method
Designers select from several configurations including series or parallel termination depending on power consumption constraints and the number of receivers. Series resistors sit at the source to absorb reflections returning from the load, while parallel resistors connect to a reference plane at the far end of the trace. Each method offers a trade off between signal quality and the thermal load added to the assembly.
Power budgets often dictate the choice.
Layout Requirement
Component placement is the primary driver of signal quality at the end of a line. Resistors must be placed as close as possible to the physical pin of the device to minimize the effect of edge termination stubs. Any length of trace between the termination and the destination introduces parasitic inductance that degrades the effectiveness of the match.
Placement is final.