Ejection Speed
A kinematic parameter defines the speed at which a liquid volume leaves the printhead nozzle during solder mask or adhesive dispensing. In precision fluid jetting, exit velocity determines the momentum of each individual fluid parcel as it travels toward the board surface. Controlling this speed ensures that the fluid detaches cleanly from the nozzle orifice without pooling or stalling.
Droplet Formation
Operating parameters like jetting frequency and fluid viscosity directly influence the speed of the departing droplet. When the piston or piezoelectric actuator strikes the fluid chamber, it generates a pressure wave that forces the liquid through the nozzle. If the speed is too low, the fluid fails to sever from the nozzle, which leads to stringing and inaccurate deposition.
Alternatively, excessive speed causes the fluid column to break into multiple uncontrolled fragments before hitting the target pad, resulting in splash defects that bridge adjacent conductors.
Process Control
High-speed camera systems capture the flight path of the droplets to calibrate the dispensing equipment during setup. Automated optical inspection after dispensing detects any misalignment or volume discrepancy caused by velocity drift. Maintaining a stable dispensing environment with regulated fluid temperatures prevents viscosity fluctuations that would otherwise alter the ejection speed.