Moisture Ingress
Moisture sensitivity levels of electronic components dictate the safe duration for which devices can remain exposed to ambient factory conditions before assembly. After floor life expiration, moisture that has penetrated the plastic packaging of the components poses a severe risk of internal damage during reflow. This water vapor expands rapidly when subjected to temperatures exceeding two hundred degrees Celsius, which causes the package to crack or delaminate.
Exposure Limit
Factory atmospheres contain humidity that slowly penetrates the porous epoxy molding compounds used in semiconductor packaging. Once the floor life expiration occurs, the component can no longer be safely soldered without undergoing a baking cycle to drive out the trapped moisture. Standard tracking systems monitor the cumulative exposure time of moisture-sensitive devices on the production floor to prevent reflow failures.
Exposure limits are specified by the IPC-J-STD-033 standard, which defines different exposure windows based on the classification of the device.
Remediation Protocol
Baking procedures are used to restore the component to a solderable state after exposure limits have been exceeded. This drying process is carried out at high temperatures for several hours to safely release the water vapor without damaging the terminations. Restoring the package prevents internal delamination during the assembly process.