Interfacial Discontinuity
Physical separation or poor metallurgical connection between an internal copper plane and a plated through-hole barrel violates conductive path integrity. An inner layer contact defect occurs inside multilayer circuit boards where mechanical drill smear, inadequate chemical desmear, micro-etch residues, or foil oxidation disrupt copper-to-copper bonding. The defect compromises z-axis electrical integrity under IPC-6012 acceptance standards.
Assemblies exhibiting this internal flaw face high-resistance contact resistance or complete open circuits during product operation.
Etch Interface Mechanics
Mechanical drilling heats cured epoxy resin past its glass transition point, dragging viscous material across inner layer copper foil faces exposed within the hole bore. Permanganate or plasma desmear baths must digest this smear without over-etching inner layer foils or creating excessive glass-fibre relief. Incomplete chemistry renewal leaves residual polymer film over inner plane copper edges, impeding subsequent electroless copper deposition.
Electroless copper layers fail to achieve chemical bonding against contaminated surfaces, leaving a latent mechanical seam. Thermal excursion during assembly reflow subjects the barrel to z-axis expansion forces, driving separation across this poorly bonded junction. Post-reflow cooling leaves an open circuit, an erratic signal bounce, or a temperature-sensitive resistive path.
Metallographic Evaluation
Microsection analysis exposes inner foil-to-barrel interfaces for direct evaluation under optical microscopes. Test coupons placed within panel perimeter rails, specifically standard thermal stress coupons, undergo float testing on molten solder per IPC-TM-650 Method 2.6.8 prior to grinding and polishing. Polished sections viewed under high magnification reveal micro-separation, post-hole drill tears, resin recession, or chemical residue films between the plated copper sleeve and inner lands.
Four-wire Kelvin resistance testing across daisy chains measures milliohm variations across successive layer interconnects, exposing latent interface resistance before physical crack propagation causes complete failure.