Interface Failure
Separation or chemical contamination at the junction where a plated through-hole barrel meets an internal copper plane compromises signal transmission and power distribution in multilayer circuit boards. An innerlayer interconnect defect disrupts this metallurgical connection, appearing as post separation or inner-foil tearing. The failure interrupts continuous current flow between surface layers and embedded circuitry under environmental stress.
Manufacturing origins include residual drill smear or inadequate chemical micro-etching that reduces the contact area. The category terminates at the junction itself, excluding mid-line copper barrel cracking and outer pad delamination.
Mechanical Stress
Z-axis thermal expansion mismatch between the organic polymer laminate and the electrodeposited copper barrel places immense tensile loads on the innerlayer interface during reflow soldering. When circuit boards pass through multiple lead-free thermal excursions exceeding 240 degrees Celsius, resin matrices expand at rates five times higher than metallic copper. Weakly bonded interfaces shear apart under this vertical displacement, producing open circuits that frequently reconnect when the board cools back to ambient room temperature.
Such intermittent behavior conceals damage during unpowered post-reflow handling.
Thermal Screening
Interconnect stress testing and microsection analysis provide primary verification during lot acceptance. Microsectioning under high-magnification optical microscopy exposes physical gaps between the plated copper cylinder and the internal copper land. Thermal cycling coupled with continuous four-wire Kelvin resistance monitoring detects minute resistance changes exceeding five percent, confirming early interface rupture before complete mechanical separation occurs.