Plane Charge
Embedded charge storage occurs across the thin dielectric layer separating adjacent power and ground planes within a printed circuit board stackup. High-frequency power delivery relies on inter-plane capacitance to supply immediate transient currents to integrated circuits before discrete decoupling capacitors respond. Plane pair area, dielectric thickness, and relative permittivity determine the total capacitive charge stored within the substrate structure.
Ultrathin dielectric cores increase plane capacitance while reducing loop inductance at gigahertz frequencies.
Supply Noise
Excessive separation between power and reference copper layers reduces distributed capacitance, shifting power distribution network impedance peaks to lower frequencies. Insufficient inter-plane capacitance causes transient power supply voltage drops during simultaneous switching events in high-speed microprocessors. Noise coupling amplifies across neighboring signal vias.
Core Optimization
Impedance profiles across the power distribution network are measured using vector network analyzers equipped with microprobe fixtures. Maximizing inter-plane capacitance requires specifying dielectric core thicknesses of two mils or less between adjacent power and ground copper layers. Embedded capacitance material laminates offer high dielectric constants to lower high-frequency power impedance without increasing board footprint.
Time-domain reflectometry verifies plane-to-plane capacitance parameters across manufactured raw panels before component assembly. Minimizing loop inductance through close plane spacing provides stable supply voltages under extreme dynamic load variations.