Interface Separation
Encapsulated semiconductor packages depend on strong adhesion between the internal metal frame and the surrounding epoxy molding compound. During thermal cycling or board assembly, leadframe disbond occurs when these surfaces separate due to thermal stress or surface contamination. This defect compromises the structural integrity of the plastic package by creating air gaps.
It allows external moisture to collect along the internal metallic paths of the device.
Acoustic Diagnostics
Non-destructive scanning acoustic microscopy is the primary method used to detect these internal delamination boundaries. The ultrasonic waves reflect differently at the separated interface compared to a solid bond, producing high-contrast areas in the scanned image. This inspection identifies weak regions before they propagate to cause total failure of the package.
Engineers use these acoustic scans to evaluate the effectiveness of adhesion promoters applied to the metal frames during the stamping process. This diagnostic tool prevents the shipment of components that are susceptible to premature failure.
Reliability Consequence
Delamination of the metal-epoxy interface eventually leads to broken wire bonds or corrosive failure under humid operating conditions. The resulting opens or short circuits render the component non-functional. Preventing this separation requires optimizing the molding temperature and utilizing roughened leadframe finishes.