Microstructural Examination
Destructive sectioning, encapsulation, and optical analysis methods expose internal physical features of printed circuit boards and electronic assemblies. Rigorous metallography reveals innerlayer copper thickness, barrel plating integrity, intermetallic morphology, laminate voiding, and microcrack initiation within structural layers. Ground and polished cross-sections prepared according to IPC-TM-650 Method 2.1.1 provide verifiable physical proof of internal conformance that non-destructive X-ray or optical testing cannot resolve.
The technique operates destructively, requiring dedicated coupon designs from production panel borders to evaluate whole production lots. Once ground beyond targeted centerlines, the sample cannot be restored for re-measurement.
Specimen Preparation
Accurate analysis requires strict adherence to progressive cutting, mounting, grinding, and polishing procedures. Coupons excised using diamond saws are mounted in cold-cure epoxy or acrylic resins under vacuum to eliminate air entrapment. Successive abrasive silicon carbide papers reduce the mounted specimen toward the target inspection plane, followed by diamond or colloidal silica polishing suspensions that remove all micro-scratches.
Chemical etchants, including ammonium hydroxide and hydrogen peroxide solutions, selectively attack grain boundaries to reveal microstructural grain distribution, plating transitions, and intermetallic layers. Inadequate grinding generates metal smearing that hides plating cracks or gives false indications of resin separation.
Microscopic Verification
Inspection under brightfield and polarized light illumination verifies compliance with design specifications and reliability standards. Technicians measure copper plating thickness inside plated through-holes, check for drill smear, quantify etchback depth, and inspect for innerlayer separation at interconnect joints. Scanning electron microscopy combined with energy-dispersive X-ray spectroscopy supplements optical inspection when elemental identification of interfacial phases or black pad corrosion is necessary.
Cross-sections confirm whether voids, laminate delamination, or solder joint separations exceed allowable acceptance limits. Photographic documentation from this inspection forms the decisive technical record for lot acceptance or rejection.