Stress Ratio
Multiaxial stress states at a crack tip are characterized by the ratio of shear force to normal force. In package reliability studies, mode mixity determines the path that a propagating crack will follow through the printed circuit board assembly. This parameter dictates whether the crack remains on the boundary or branches into the bulk polymer.
Fracture Characterization
The mathematical representation of this relationship is expressed as a phase angle where zero degrees represents pure tensile loading and ninety degrees represents pure shear loading. The mode mixity of the solder joint changes as the temperature rises during reflow soldering. This variation occurs because the differential expansion of the copper pads and the fiberglass laminate imposes combined bending and stretching.
Quantifying this angle allows engineers to design joint geometries that resist shear driven failures.
Mechanical Consequence
Materials exhibit different fracture resistance values depending on the current phase angle of the applied loads. Under pure tensile conditions, the threshold energy required for crack propagation is usually lower than under shear conditions. When the mode mixity shifts toward shear loading, friction between the rough crack faces increases the effective fracture resistance.
Designers utilize this behavior by modifying the layout or adding mechanical fillets to direct stresses into more resilient fracture modes, reducing the risk of catastrophic separation under drop tests.