Nonlinear Distortion
Radio frequency interference can occur in passive components when multiple high power signals interact at junctions with nonlinear electrical properties. Passive intermodulation is the generation of unwanted signals at the sums and differences of the original frequencies within devices like connectors, cables, antennas and filters. This effect is particularly problematic in cellular base stations where transmitted signals can interfere with weak incoming signals in the receive band.
Source Mechanism
Metal to metal contacts that are loose, oxidized or contaminated act as tiny diodes that rectify the signals. Poorly tightened connectors or low quality plating materials are common locations for this activity. Maintaining high manufacturing standards for surface finish and contact pressure is the primary way to minimize these distortions.
Passive intermodulation can also arise from ferromagnetic materials like nickel which exhibit a nonlinear relationship between magnetic field and flux density.
System Impact
Communication networks experience reduced capacity and dropped calls when the noise floor rises due to these unintended frequencies. Because the interference is generated within the passive hardware itself, it cannot be easily filtered out once it appears in the signal path. Testing for passive intermodulation requires specialized equipment that transmits high power tones and listens for the low level distortion products.
Rigorous torque specifications for connectors and the use of non magnetic plating like white bronze help ensure that the system remains quiet. Technicians also inspect for metal shards or loose debris within the transmission line that might trigger nonlinear mixing.