Detection Principle
Electromagnetic induction provides a method for identifying discontinuities in conductive materials through the monitoring of impedance variations. Eddy current testing detects surface and near-surface defects such as cracks, voids, or inclusions by passing an alternating current through a probe coil held near a metal target. A magnetic field generated by the probe drives circulating loops of electrical current within the conductive component.
These loops generate a secondary magnetic field that opposes the primary field and forces a measurable change in coil impedance when the current path encounters a physical obstruction. Data captured during this scan correlates to the depth and size of anomalies based on the frequency of the excitation signal and the electrical conductivity of the part. Proximity between the coil and the workpiece remains the primary variable for maintaining signal stability during high-speed production line inspections.
Process Application
Automated assembly lines utilize this technology to verify material integrity on processed copper traces and multilayer circuit boards. Eddy current testing identifies inconsistencies in solder joints or metallic paths that suggest improper plating thickness or subsurface fractures. Sensors scan the surface at specific intervals to map conductivity across defined zones.
Any local variation from the established baseline signal triggers an immediate rejection signal to the downstream sorting mechanism. This technique proves effective for non-destructive verification on components where traditional visual inspection misses microscopic fatigue markers in the metal structure.
Boundary Condition
Signal penetration depth limits the utility of this approach for examining internal features buried deep inside dense or shielded assemblies. High electrical conductivity materials provide excellent sensitivity for surface flaws, but magnetic permeability fluctuations in ferrous alloys often create noise that masks smaller defects. Probes require calibration against known standards of identical geometry to account for the lift-off effect caused by variations in the air gap between the sensor and the part.
Physical contact is unnecessary for the execution of the scan, though rigid fixture requirements for the sensor ensure that alignment errors do not produce false readings. Sensitivity fades rapidly as the distance from the coil increases because the magnitude of induced currents drops with the cube of the separation gap.