Layer Geometry
Dimensional compliance standards dictate the height of electrodeposited or electroless metal coatings applied to printed circuit board features. Verification of plating thickness ensures that surface finishes and hole wall metallizations satisfy functional conductivity and solderability requirements. Standards such as IPC-6012 specify minimum copper deposit thickness inside plated through-holes to guarantee thermal endurance.
Deviations below specified nominal values lead to electrical opens, while excessive thickness alters hole finished diameters.
Reliability Impact
Insufficient coating thickness on surface mount pads leads to rapid dissolution of protective metals into molten solder during reflow. When plating thickness drops below design specifications, underlying copper oxidizes, causing solderability degradation and dewetting. Conversely, excessive electroless nickel thickness causes high stress accumulation, resulting in brittle micro-fractures known as black pad.
Balanced deposition guarantees sound intermetallic formation without compromising mechanical ductility. Control of plating bath current density prevents edge build-up and ensures uniform deposition across high-aspect-ratio vias. Consistent metal deposition preserves tight tolerance mechanical fitments for press-fit connectors.
Non-Destructive Metrology
X-ray fluorescence spectroscopy measures coating thickness without destroying production printed circuit boards. Instrument calibration against certified reference standards ensures accurate depth determination for multi-layer surface finishes like ENIG or ENEPIG. Automated XRF scanning verifies layer uniformity across broad manufacturing panels in high-volume assembly lines.
Destructive microsectioning acts as a secondary verification method for internal via walls.