Mode Conversion
Frequency domain measurements characterizing the transformation of a differential input signal into a common mode output signal provide a metric for evaluating electromagnetic interference risk. High speed serial links rely on the sdc21 parameter to quantify the quality of the transmission line balance. A low value indicates that the differential pair is well matched and is not radiating energy as noise.
Signal Integrity
Asymmetry in the trace lengths or local variations in the glass weave of the circuit board cause one half of the pair to arrive slightly later than the other. This skew forces the differential energy to convert into common mode energy which travels along the outside of the conductors. The sdc21 parameter captures this loss and helps engineers identify where the layout needs better symmetry.
Because common mode signals are a primary source of electromagnetic radiation, controlling this parameter is a requirement for meeting regulatory emission limits in high speed electronics.
Compliance Testing
Network analyzers measure these values across a wide frequency range to ensure conformity with standards like PCIe or Ethernet. Designers look for a specific limit line that the measured curve must not cross to pass certification. Lowering the conversion rate reduces the susceptibility of the system to external noise.