Fracture Strength Evaluation
Mechanical testing pushes individual solder connections with a dynamic ram to measure the peak force required to detach them from a circuit pad. Implementing a solder ball shear test evaluates the adhesive and cohesive strength of the solder joint after assembly or environmental conditioning. This method applies a parallel force to the substrate surface, yielding quantitative data on force-displacement characteristics.
Shear Tool Alignment
Positioning of the moving blade requires precise control of the standoff height above the board surface to avoid contact with the copper pad. If the tool is set too high, it induces bending forces rather than pure shear. Setting the blade too low leads to gouging of the solder mask, invalidating the test result.
Failure Mode Classification
Post-test examination of the fractured surface distinguishes between ductile, brittle and mixed-mode structural failures. Brittle fracture at the intermetallic compound layer indicates poor wetting or chemical contamination, which correlates with low board reliability. Ductile failures within the bulk solder confirm a robust metallurgical bond, indicating that the reflow profile and pad surface finish met quality specifications.
Standardizing this classification across different test runs allows production managers to trace bond-line weaknesses back to specific reflow oven temperature zones or flux chemistry issues.