Precision Thickness Gauge
A specialized manual measurement tool featuring a curved contact surface allows for accurate thickness readings on non-flat objects. Using a spherical anvil micrometer is the standard method for determining the copper or dielectric thickness of curved or irregular circuit board substrates. This mechanical design prevents the measurement errors that would occur if a flat instrument were placed against a non-planar surface.
It ensures that the measurement is taken at the absolute peak of any local curvature rather than averaging across a wider area. Technicians rely on this precision tool during receiving inspection to audit raw material dimensions before releasing panels to the lamination line.
Measurement Mechanism
The curved surface of the anvil minimizes the area of contact, which helps to penetrate soft surface coatings or solder mask layers to measure the underlying laminate. Operators turn the ratchet thimble until a click is heard to ensure that a consistent force is applied across all measurements. This consistent technique is essential for achieving repeatable data when verifying the thickness of thin substrates.
Quality Inspection
Inspectors use this tool during in-process checks to confirm that the substrate thickness matches the design specifications. Comparing these manual measurements against non-destructive eddy current readings provides a secondary check on critical dimensions. Keeping this instrument properly calibrated against gauge blocks ensures the ongoing accuracy of the physical inspection process.