Test Structure
Quality assurance test coupons evaluate conductor geometry and dielectric properties on manufacturing panel borders. PCB fabricators utilize a stripline coupon to measure high-frequency trace impedance and dielectric constant on inner circuit layers bounded by ground planes. Printed test traces embedded within center dielectric layers mirror the exact copper foil weight and pressing cycle of primary circuit boards on the same panel.
Measurement boundaries apply only to representative panel locations, excluding localized trace variations caused by dense component drilling on active board areas.
Impedance Evaluation
Time-domain reflectometry applies fast voltage steps to coupon test traces, measuring reflected wave amplitude to determine trace characteristic impedance. Deviations in trace width or dielectric height shift trace impedance away from targeted single-ended or differential values. Testing coupons on panel perimeters provides non-destructive quality verification before boards proceed to component assembly.
Microsectioning coupon traces verifies physical etched trace profiles and dielectric spacing under high-magnification optical inspection. Automated testing systems log impedance results across production lots to verify panel-to-panel manufacturing consistency. Process control limits flag etching anomalies or prepreg thickness variations before boards enter expensive assembly processes.
Fabrication Boundary
Coupons reflect production panel processing conditions accurately within peripheral zones. Etch rate variations across large panels create minor impedance gradients between edge coupons and center board traces. Impedance acceptance criteria govern coupon verification before panel routing.