Composite Material Ratio
The volumetric proportion of reinforcement material to the surrounding resin matrix determines the overall physical and electrical properties of a circuit board laminate. Measuring the substrate filling factor provides critical data on how the woven fiberglass and epoxy resin are distributed within the cured board. This composite balance is a primary driver of the dielectric constant and the coefficient of thermal expansion.
It affects how the material responds to the drill bits and chemical desmear processes during the hole-making stages of fabrication. Accurate measurement of this ratio helps the material manufacturer maintain consistency from batch to batch.
Electrical Performance
A high concentration of glass reinforcement raises the dielectric constant because glass has a higher permittivity than epoxy resin. Conversely, regions that are rich in resin have a lower permittivity but may suffer from greater thermal expansion during soldering. Maintaining a uniform ratio across the board is necessary to prevent localized variation in trace impedance.
Manufacturing Stability
If the proportion of resin is too low, the laminate can suffer from micro-voids or dry spots during the pressing cycle. These structural defects can lead to delamination when the boards are subjected to thermal shock or mechanical routing. Regulating the prepreg formulation and pressing parameters ensures that the composite material remains structurally sound throughout its service life.