Material Degradation
Subjection of electronic assemblies to elevated temperatures over defined durations alters the physical and electrical properties of the constituent materials. Controlled thermal exposure during board fabrication and assembly testing helps evaluate the endurance of the substrate, copper traces and solder joints against heat-induced damage. It simulates the environmental stress the board will encounter over its operating lifetime.
Reliability Testing
Multi-layer circuit boards undergo intense heating during reflow soldering and wavesoldering, which can exceed two hundred and sixty degrees Celsius. This rapid thermal exposure can cause delamination or blistering if moisture is trapped within the epoxy-glass laminate. Over longer periods of operation, sustained high temperatures drive the growth of brittle intermetallic compounds at the interface between the solder and the copper pad.
Designers specify thermal baking procedures before assembly to drive out moisture and prevent defects, while also using thermal cycling tests to evaluate the fatigue life of plated through-holes.
Failure Prevention
Failure to account for heat-induced stress leads to trace cracking and electrical opens in harsh operating environments. Testing under standardized exposure profiles ensures that the substrate material retains its mechanical and electrical ratings throughout the product life cycle. These evaluations help manufacturers choose resins with a high glass transition temperature.