Pad Restoration
Manufacturing step involves the application of a conductive or non-conductive material over a filled via to create a flat, solderable surface. Through via capping, designers can place components directly over the vertical interconnect without risking solder drainage into the hole. This technique is a fundamental requirement for via-in-pad structures used in high density interconnect designs.
Fabrication Sequence
The process begins with drilling and plating the via hole, followed by filling it with an epoxy resin that matches the thermal expansion characteristics of the board. After the filler cures, the surface is planarized through mechanical grinding to remove excess material and create a smooth profile. A final layer of copper is then plated over the top to provide electrical continuity and a durable base for assembly.
This via capping must be thick enough to withstand the thermal stress of reflow without cracking or delaminating. Quality depends on the plating thickness.
Assembly Advantage
Assembly results improve when the vertical interconnects are sealed. Effective via capping prevents solder paste from being sucked into the via during the assembly process. This ensures that the solder joint between the component ball and the pad remains intact and thermally stable.
Flat pads improve yield.