Material Nonuniformity
Fiberglass-reinforced laminate materials display varying physical and electrical properties along different directions due to the woven structure of the reinforcing glass cloth. This directional variation, known as weave anisotropy, occurs because the density and tension of the yarn in the warp direction differs from that in the fill direction. The uneven distribution of glass fibers and resin creates localized variations in the dielectric constant and thermal expansion rates across the substrate.
It affects both high-speed signal integrity and the dimensional stability of the board during manufacturing.
Signal Skew
Differential signal pairs routing over a woven substrate can experience skew if one trace runs primarily over the glass bundles while the other trace runs over the resin-rich gaps. This dielectric mismatch arises directly from the weave anisotropy, causing the signals to travel at different speeds and arrive out of phase. To minimize this effect, designers often route high-speed traces at a slight angle relative to the glass weave or choose laminates with a spread glass weave pattern.
This routing adjustment ensures a more uniform dielectric constant along both traces of the pair.
Structural Impact
The directional difference in thermal expansion also influences the dimensional movement of layers during lamination. Testing laboratories analyze the fiber structure to ensure that the anisotropy does not lead to excessive board twist during reflow.