Chemical Concentration
Preferential accumulation of ionic contaminants occurs at material interfaces during the curing or soldering of electronic assemblies. Chlorine segregation describes the movement of halide ions toward the boundary between the solder mask and the copper trace or within the intermetallic layer. The ions often originate from flux residues, moisture, handling contamination or poor cleaning processes.
The boundary where this effect ceases is defined by the solubility limit of the host material or the completion of the thermal cycle.
Reliability Impact
Ionic mobility increases during the high temperature excursions of a reflow oven. When chlorine segregation reaches a critical density at a junction, it facilitates the formation of conductive anodic filaments. These filaments grow along the glass fibers of the substrate, leading to insulation resistance failure between adjacent conductors.
High humidity accelerates this degradation because water molecules provide the medium for ion transport. The presence of a bias voltage creates the electrical field that pulls the ions toward the anode. Once a path is established, the leakage current increases until a hard short circuit occurs.
This mechanism remains a primary cause of field failures in automotive and aerospace electronics where environmental sealing is imperfect.
Detection Method
Visual inspection cannot identify these microscopic concentrations of ions. Identification relies on energy dispersive x-ray spectroscopy or ion chromatography after a localized solvent extraction. If the analysis shows localized peaks of halides, the fabrication process requires an audit of the pre-flux cleaning stages.