Interconnect Architecture
Flip chip packaging designs require high density vertical interconnects to establish electrical connections between the silicon die and the package substrate. A copper pillar bump provides a rigid cylindrical column of copper topped with a solder cap to facilitate this high density connection. This microelectronic column maintains a stable standoff height during the reflow process, preventing the solder bridging that often occurs with standard spherical bumps.
Fabrication Sequence
Electrochemical deposition onto a seed layer of titanium and copper defines the column geometry within a photoresist template. Once the photoresist is stripped and the excess seed layer is etched away, a brief reflow step shapes the solder cap. This process requires careful control of current density to ensure uniform column heights across the entire wafer surface.
An uneven distribution of heights leads to non-contact open circuits or excessive stress during subsequent die attachment. To prevent such defects, automated optical inspection tools measure the height of each copper pillar bump to verify coplanarity before dicing and assembly. This automated inspection step ensures that only wafers meeting strict height tolerances proceed to the flip chip attachment stage.
Reliability Risk
Intermetallic compound formation at the solder interface is the principal wearout mechanism for these microsecond-scale joints. Thermal cycling induces shear stresses at the interface due to the coefficient of thermal expansion mismatch between the silicon die and the organic substrate. Cracking typically initiates at the corner joints where the mechanical strain is highest.
These interface fractures lead to intermittent high resistance or complete electrical open failures in the finished microelectronic assembly.