Material Depression
Substrate surface depressions occurring during lamination define the core sink where underlying resin fails to support the copper cladding. This core sink often results from uneven pressure distribution or localized resin depletion in the prepreg layers during the heat cycle. Because the defect creates a non-planar surface, it interferes with fine-line lithography and subsequent assembly processes.
The boundary of the condition lies at the transition from a localized dip to a generalized thickness variation across the entire panel.
Planarity Impact
High density interconnect designs require extreme flatness for laser drilling and component mounting. A core sink introduces depth variations that cause focus errors in laser systems or paste volume inconsistencies during screen printing. These irregularities lead to failures.
Measuring the depth with a dial indicator or non-contact laser scanner confirms whether the board meets workmanship standards. The presence of such a dip indicates a failure in the hydrostatic pressure balance within the press.
Process Control
Lamination parameters such as press temperature and ramp rate determine the flow characteristics of the resin. Precise control prevents the core sink by ensuring the material fills every internal void before the curing reaction stabilizes the structure. Vacuum levels also influence the outcome by removing trapped air that might otherwise lead to localized collapses in the composite stack.