Flow Gradient
Fluid mechanical parameters describe the rate of velocity change across adjacent fluid layers during active shear deformation. In surface mount technology, dynamic shear rate defines the mechanical force experienced by solder paste during squeegee traversal and stencil aperture filling. Solder paste exhibits pseudoplastic behavior, meaning viscosity drops sharply when the motion of the squeegee increases shear forces.
This shear thinning allows the formulation to roll smoothly across the stencil and fill tiny apertures without clogging. Rheological equilibrium depends on maintaining stable squeegee force and speed. When shearing ceases immediately after printing, the paste recovers sufficient viscosity to retain its printed shape without collapsing onto adjacent lands.
Viscous Response
Printing speed and blade geometry directly dictate how rapidly shear forces rise during the print stroke. A higher dynamic shear rate reduces internal fluid friction within the solder paste, enabling rapid transport into fine pitch stencil openings down to zero point four millimeter lead pitch. Standard squeegee velocities generate shear rates exceeding one thousand reciprocal seconds.
Aperture Release
Paste withdrawal from stencil walls during board separation requires controlled rheological recovery. If dynamic shear rate drops too abruptly without proper thixotropic rebuild, the printed deposit slumps and creates short circuits across narrow copper spacing. Viscosity testing with rotational rheometers verifies that shear response remains repeatable across consecutive squeegee strokes.