Measurement Instrument
High-frequency signal delivery requires specialized test contacts that maintain a controlled ground-signal-ground shielding structure up to the test point. Designers of high-speed digital and radio frequency circuits use the GSG coaxial probe to measure signal behavior directly on the board. This probe delivers precise measurements by preventing high-frequency radiation losses and impedance mismatches.
Signal Integrity
Controlling the path of return currents is essential for accurate high-frequency impedance measurements on printed circuit boards. The GSG coaxial probe addresses this by offering a coaxial interface where the signal pin is closely flanked by two grounding pins. This structure matches the signal pad layout on the board under test, ensuring that the electric and magnetic fields remain confined to the signal trace.
This probe minimizes the inductance that otherwise distorts measurement readings on standard probes, allowing accurate evaluation of high-speed interconnects operating at frequencies up to forty gigahertz.
Calibration Method
Accurate measurements at multi-gigahertz frequencies require removing the electrical influence of the test equipment itself. Calibration standards are measured with the GSG coaxial probe before the actual test begins, establishing a mathematical baseline for the testing environment. This step isolates the board’s true performance from the probe’s contact resistance and cable losses.