Architecture Definition
High-density printed circuit board architecture utilizing microvia connections across every conductive layer eliminates core substrates and conventional buried vias. An HDI any layer interconnect stackup enables direct vertical routing between non-adjacent circuit paths throughout the entire PCB thickness. Standard IPC-2226 Type VI structures define the physical constraints for these high-density interconnects.
The definition excludes conventional high-density interconnect designs that rely on a central rigid core dielectric.
Lamination Fabrication
Sequential lamination cycles build the stackup layer by layer through repeated dielectric deposition, laser ablation, target exposure and copper electroplating. Laser ablation creates microvias with diameter-to-depth aspect ratios maintained below one to one for reliable metallization. Copper plating completely fills microvia cavities, forming solid copper pillars capable of supporting stacked microvias directly above one another.
Thermal stress during multiple lamination passes can induce z-axis expansion, putting stress on thin target pads. Unbalanced copper distribution across inner layers amplifies panel warpage, causing automated placement failures during surface mount assembly.
Inspection Protocol
Microsectioning combined with optical microscopy inspects structural integrity and metallization thickness within stacked microvias. Thermal stress testing according to IPC-TM-650 Method 2.6.8 exposes test coupons to solder float conditions at elevated temperatures. Target pad separation or voiding inside filled vias constitutes structural failure.