Internal Substrate
Internal circuit board layers with high routing density accommodate the routing paths of advanced semiconductor packages. These substrates, known as HDI inner layers, contain microvias and ultra-thin copper cladding to minimize the thickness of the multi-layer stack. They provide the necessary electrical connections between different signal levels in complex devices.
This routing configuration minimizes circuit board surface area by transferring traces to internal layers.
High Interconnection
Sub-mil routing patterns on these inner cores require thin copper foils and precise laser ablation to form reliable blind and buried vias. The build process begins with double-sided clad laminates that undergo fine-line etching and direct-write imaging to define the primary circuitry. Because these layers are buried during subsequent lamination cycles, their surfaces must be treated with adhesion-promoting chemicals to prevent delamination.
Sequential build-up technology allows fabricators to add dielectric sheets and copper foils iteratively to the core. This approach allows the formation of stacked or staggered microvia structures that bypass the routing congestion of traditional boards. It also enables high signal speeds by reducing the length of stub connections.
Physical Integrity
Inspection of these inner circuits relies on automated optical testing before they are enclosed in the multi-layer sandwich. High-resolution cameras compare the etched patterns against the digital design files to detect opens, shorts, or copper voids. Any defect found at this stage must be corrected or the panel must be discarded before the expensive lamination step begins.