Conduction Handling
Circuit boards with copper weights exceeding three ounces per square foot require specialized handling and soldering techniques to manage their large thermal mass. In heavy copper assembly, the large volume of conductive material acts as a highly efficient heat sink, drawing energy away from the soldering iron or reflow air. This characteristic necessitates higher heat inputs and longer dwell times to ensure the solder reaches its liquidus state at every junction.
Heat Management
Thermal profiles for these boards must account for the slow ramp-up times caused by the dense copper planes. Standard reflow settings often fail to provide enough energy to wet the pads, leading to cold joints or incomplete through-hole fill. Preheating the entire assembly is often required to reduce the temperature differential between the solder and the substrate.
Induction heating or specialized high-power reflow ovens provide the necessary energy to overcome the conductive cooling effects of the inner layers. Engineers often utilize thicker stencils to deposit more solder paste, compensating for the larger gaps and the higher thermal requirements of the massive traces.
Stress Consideration
Copper features expand and contract more than the surrounding epoxy resin during thermal cycling. This mismatch can lead to delamination or cracked vias if the assembly process is not carefully controlled. Controlling the cooling rate prevents the build-up of excessive internal mechanical stress.