Substrate Architecture
Controlling signal propagation velocity and minimizing electromagnetic radiation requires deliberate arrangement of dielectric materials and copper foils within multilayer printed circuit boards. Fabricators assemble high frequency stackups by pairing low-loss thermoset resins or fluoropolymer dielectrics with smooth copper foils. Controlled dielectric thickness ensures uniform characteristic impedance across microwave and millimeter wave signal paths.
Standard fiberglass prepregs often produce phase skew when high speed differential traces cross dielectric weave intersections.
Layer Arrangement
Symmetrical core and prepreg arrangements prevent mechanical warping during high temperature lamination cycles. In high frequency stackups, power and ground planes reference outer signal layers to establish controlled microstrip or stripline configurations. Hybrid board constructions combine low-loss PTFE laminates for high speed signal layers with standard epoxy glass cores for power distribution.
Combining disparate material types introduces thermal expansion mismatches along the vertical board axis. Fabrication facilities manage z-axis thermal expansion by selecting compatible resin system transition temperatures. Bondply materials join copper foils to low-loss substrates during sequential lamination cycles.
Misalignment between adjacent signal and ground layers alters trace capacitance and shifts targeted line impedance beyond tolerance boundaries.
Impedance Constraint
Etch profile variations and copper thickness tolerances impose lower limits on achievable transmission line dimensions. Trace geometries narrower than three thousandths of an inch increase conductor loss from skin effect at gigahertz frequencies. Thicker dielectric layers require wider signal traces to maintain target single-ended or differential impedance specifications.
Increasing laminate thickness expands total board height and complicates small via drilling operations.