Flammability Standard
International safety standards mandate standardized glow-wire test procedures to evaluate the fire hazard risk of end products containing polymeric materials. Compliance with IEC 60695 2 11 verifies that plastic housings and insulating structural components withstand localized thermal stresses without sustaining active combustion. The testing protocol simulates thermal effects produced by overloaded electrical conductors or glowing components in proximity to insulating material.
Assemblies destined for unattended consumer electronics must satisfy these flammability metrics prior to commercial deployment.
Thermal Exposure
Laboratory testing involves pressing an electrically heated nickel-chromium loop against a specimen surface at specified temperatures for thirty seconds. Standardized thermal exposure parameters under IEC 60695 2 11 evaluate flame ignition, flame propagation, and burning drop generation onto a tissue paper layer placed beneath the test specimen. Target temperatures range from five hundred fifty degrees Celsius to nine hundred sixty degrees Celsius depending on product classification and end-use environments.
Technicians record ignition onset times, flame persistence after wire withdrawal, and tissue paper ignition caused by molten droplets.
Compliance Threshold
Test samples pass when flaming or glowing ceases within thirty seconds after removal of the heated wire tip. Specimen combustion must not ignite the underlying tissue paper layer during or after thermal contact. Failure to extinguish within prescribed timeframes requires component redesign or material substitution.