Emission Measurement
High frequency electromagnetic emissions from integrated circuits are measured using a defined surface scan technique. The iec 61967 3 standard defines the procedures and probe configurations for evaluating near field electric and magnetic fields. This method provides repeatable spatial profiles of radiation across the silicon surface.
Probe Calibration
The measurement system employs miniature magnetic loop or electric field probes mounted on a high precision automated translation stage. Under iec 61967 3, the stage moves the probe across the active face of the component at a constant distance to record signal amplitude. This procedure maps the localized hot spots that represent the primary sources of electromagnetic interference.
The collected data guides design teams in optimizing trace routing or shielding.
Compliance Limit
Accurate execution of these near field scans requires strict control over the test environment and the substrate layout. The printed circuit board holding the integrated circuit must use a standardized geometry that minimizes parasitic radiation from the power supply network. Because the standard regulates the physical dimensions of the probes and the scan height, deviation from these guidelines invalidates comparison between different laboratories.
Consistent implementation of these guidelines ensures that components meet regional electromagnetic compatibility requirements before final system integration.