Characterization Methodology
Precision mechanical probes characterize the adhesion and hardness of thin films by applying controlled vertical and lateral forces. Engineering labs use nanoscratch testing to determine the critical load at which a coating fails by delamination or cracking. This technique is particularly useful for evaluating the bond between plated metal and resin substrates.
It provides a quantitative assessment of interfacial strength at the micrometer scale.
Measurement Sequence
The test begins by moving a diamond indenter across the surface while gradually increasing the normal force. Sensors record the lateral force and the penetration depth as the tip moves. When the indenter reaches a critical depth or force, the coating peels or cracks, indicating the failure point.
These data points are plotted to find the work of adhesion. Comparing results across different plating chemistries allows for the selection of the most stable process.
Fabrication Value
Integrating nanoscratch testing into the quality control process helps identify weaknesses in the surface preparation steps. It can detect the presence of thin contamination layers that traditional pull tests might miss. Manufacturers use this information to adjust micro etching times or desmear concentrations.
This level of detail is necessary for developing new dielectric materials and high reliability finishes.