Alignment Tolerance
Geometric requirements for surface mount components specify the maximum vertical distance between the lowest and highest lead when the part sits on a flat surface to ensure reliable electrical connections across the entire package. Pin coplanarity ensures that every terminal of a component makes contact with the solder paste on the printed circuit board during placement. It is typically measured in mils or microns relative to a seating plane defined by the three lowest leads.
Standard tolerances for most fine-pitch components are less than 0.1 millimeters.
Inspection Method
Optical inspection systems use laser triangulation or shadows to map the height of each pin before the component is placed on the board. This non-contact measurement happens at the pick and place machine to catch damaged parts before they are soldered. Automated algorithms compare the measured heights to the tolerance limits defined in the component library.
Assembly Consequence
Open circuits or weak solder joints occur when a lead exceeds the specified distance from the board surface. The solder paste cannot bridge a gap that is too large, resulting in a failure that is often difficult to detect with standard visual inspection. Maintaining tight control over this property is essential for the high yield production of large packages like ball grid arrays or quad flat packs.