Destructive Evaluation
Sequential grinding and polishing of a sample in precise micro-steps allows for the creation of a three-dimensional representation of internal defects. High-density board testing uses serial cross-sectioning to locate buried micro-vias and internal copper voids. This technique provides physical verification of failure locations that cannot be seen on a single cross-sectional cut.
Volumetric Reconstruction
Each removed layer must be measured precisely to ensure the spacing between sequential images remains consistent. The technique of serial cross-sectioning requires mounting the board sample in a rigid polymer puck and repeatedly removing micrometer-thin layers. After each layer is removed, technicians capture high-resolution images of the polished surface.
Compiling these images yields a three-dimensional model of the internal track structures, which helps identify the source of intermittent faults. The process reveals structural issues like micro-voids, plating separations, and thin spots in copper walls that would easily be missed by a single, random slice.
Defect Identification
Finding sub-surface cracks or void structures within complex solder joints requires visual access across the entire volume of the joint. When applied to solder ball analysis, serial cross-sectioning exposes hidden delamination lines and micro-void arrays. This process gives assembly engineers the data needed to adjust oven profiles.