Flex Area
Multi-layer flexible printed circuit boards must be designed to bend repeatedly without tearing or breaking the internal conductive copper foil. Unbonded flex layers are copper-clad dielectrics that are left unattached to each other in the flexing zone, allowing them to glide freely during mechanical movement. This construct prevents the layers from stiffening each other, allowing for a much tighter bend radius than bonded stacks.
Their use is specified in high-movement applications like robotic joints and wearable devices.
Stress Distribution
Continuous movement generates significant tensile and compressive stresses on the outer boundaries of a curved board. Utilizing unbonded flex layers helps to decouple these stresses by ensuring that each individual layer has its own neutral axis of bending. This reduces the strain on the copper traces, which prevents mechanical fatigue and early breakage.
Stress models show that unbonded layers experience a fraction of the stress compared to a fully laminated stack of the same thickness.
Fabrication Challenge
Register control and laminate handling become more difficult when layers are not fully laminated. Since unbonded flex layers are separated, they are prone to moving during the drill and rout steps, requiring specialized tooling and secure clamping during processing. Moisture-resistant barriers must also be used to prevent water ingress between the unbonded sheets.