Material Distinction Metric
Variations in the absorption of radiation between different substances allow for the visualization of internal structures in a 3D scan. Volumetric density contrast is the difference in X-ray attenuation between two adjacent voxels in a computed tomography data set. It allows an inspector to see a copper trace inside a resin substrate or a void inside a solder ball.
This value is determined by the atomic number and physical density of the materials.
Voxel Intensity
Each point in the 3D grid receives a grayscale value based on the calculated density. Higher density materials like lead or tin appear brighter. Lower density materials like air appear dark.
Defect Visibility
Success in identifying a crack depends on the contrast between the metal and the air gap. If the contrast is too low, the crack blends into the surrounding grain. Lead-free solder provides less contrast than traditional leaded solder because its average atomic number is lower.
This change requires more sensitive detectors and longer scan times to achieve the same level of confidence. Advanced reconstruction algorithms can enhance the edges where density changes abruptly. High contrast levels make automated sorting possible by setting clear thresholds for acceptable density.