Fabrication Criteria
Printed circuit board performance specifications published by IPC dictate rigid structural compliance rules for high-reliability electronics used in military, aerospace and medical applications. Documented criteria for IPC-6012 Class 3 micro-via acceptance establish structural limits for copper plating thickness, target pad contact, capture pad alignment and voiding within microvia barrels. These requirements govern rigid board fabrication quality prior to surface mount component assembly.
The standard defines physical PCB acceptance parameters and does not cover component placement or solder paste application.
Microsection Evaluation
High-reliability rigid circuit boards undergo rigorous metallurgical microsectioning to verify microvia structural integrity before lot approval. Applying IPC-6012 Class 3 micro-via acceptance requires destructive testing of coupon samples taken from panel borders, followed by optical microscopy at specified magnifications. Quality inspectors measure electroless and electroplated copper thickness inside blind microvias, verifying minimum wall plating thickness limits of continuous copper.
Microsections must confirm that dimple depth stays within allowed percentages of microvia diameter, preventing excessive depressions that cause air entrapment during assembly soldering. The criteria prohibit structural cracks in barrel copper, interfacial separation between target pads and plating, and voiding exceeding maximum allowed area ratios. Unacceptable plating voids or thin copper coverage at microvia corners trigger lot rejection, preventing field failures caused by thermal expansion stress in high-reliability environments.
Thermal Defect
Thermal shock testing subjects test coupons to multiple reflow simulation cycles before microsection evaluation. Structural damage such as target pad lifting, microvia neck cracking or inner-layer separation under thermal stress violates compliance rules. Meeting IPC-6012 Class 3 micro-via acceptance confirms that board microvias withstand operating temperature swings without electrical open circuits.