Core Isolation
Boundary scan instruction sets isolate internal core logic from device output drivers during automated structural testing. Executing the INTEST instruction enables internal test vectors to drive logic gates while locking external pins to predetermined voltage states. Boundary scan cells capture internal logic responses on test clock edges while preventing system noise from affecting board-level connections.
Test engineers apply this instruction to execute internal structural verification without removing components from assembled circuit boards.
Pattern Injection
Internal logic testing relies on serial vector loading through boundary scan chains to verify gate-level functionality. When loaded with the INTEST instruction, boundary scan register cells drive internal input signals and capture internal output responses. Automated test equipment shifts test vectors into boundary cells through the test data input pin during shift operations.
Applying clock cycles in the run-test or idle state executes internal logic evaluations between shift cycles. Captured internal outputs shift out through the test data output pin for automated fault dictionary matching. Test routines detect stuck-at faults, open connections, and bridge short circuits within internal logic blocks.
Pre-loading boundary cells prevents floating internal inputs during initial instruction execution.
Driver Lockout
External pin isolation prevents output drivers from disturbing adjacent components on assembled circuit boards. Loading the INTEST instruction disables active output drivers or forces output pins into high-impedance states. Overdriving protection circuits safeguard external board components against unexpected logic collisions during internal test cycles.
Verification routines confirm driver isolation prior to vector application.