Estimation Procedure
Thickness modeling determines the final height of a cured dielectric layer by accounting for copper density and resin flow. Through prepreg calculation, a designer predicts how much resin will fill the areas between traces on the adjacent core layers. This step is standard for meeting the overall board thickness requirements and impedance targets.
Mathematical Modeling
The volume of the copper traces on the inner layer is subtracted from the total volume of the available resin in the prepreg sheet. If the copper pattern is sparse, more resin remains to contribute to the layer thickness, whereas dense copper patterns consume more resin to fill the gaps. Accurate prepreg calculation uses the weight of the copper and the specific gravity of the resin to find the finished z-axis dimension.
Engineers often use a percentage of copper coverage as a proxy for the filling requirement.
Stackup Validation
Final thickness tolerances usually allow for a ten percent deviation from the nominal design. Errors in the initial prepreg calculation result in boards that are too thick for the connector or too thin for the mounting hardware. Manufacturing shops verify these results by measuring test coupons at the edge of the panel.