Fastening Defect
The destruction of the thread profile on titanium hardware or in titanium tapped holes caused by over-tightening or incorrect material selection is a significant failure mode. This titanium thread stripping occurs when the applied mechanical shear force exceeds the shear strength of the titanium material. While titanium has high tensile strength, its thread profile can still fail if the joint is subjected to excessive torque or if the thread engagement length is insufficient.
Mechanical Behavior
The low modulus of elasticity of titanium causes it to deflect more under load than steel, which can lead to non-uniform stress distribution along the thread flanks. This behavior can result in titanium thread stripping even at torque levels that steel hardware would easily withstand. Additionally, titanium is highly susceptible to galling, where the sliding contact under high pressure causes the metal surfaces to weld together and tear, destroying the thread form during assembly or disassembly.
This combination of structural deflection and surface galling means that titanium fasteners require careful torque management to ensure that they are not overstressed.
Prevention Method
Applying specialized anti-seize lubricants to the thread flanks before assembly reduces friction and prevents the metal-on-metal contact that leads to galling. This measure, combined with using precise torque-controlled assembly tools, helps prevent titanium thread stripping during production. In critical applications, designers can also use harder mating materials or install threaded inserts to reinforce the connection and distribute the mechanical load more evenly.