Chamber Process
Controlled baking of printed circuit boards in a sub-atmospheric environment removes trapped gases and moisture before assembly. Using a vacuum thermal reset restores the dry-state properties of composite substrates that have been exposed to high humidity. This method combines heat and low pressure to accelerate the diffusion of water molecules out of the resin matrix without causing thermal oxidation.
It is a critical preparatory step for high-reliability boards to prevent blistering during the reflow process.
Moisture Extraction
Lowering the atmospheric pressure within the chamber decreases the boiling point of moisture trapped in the laminate. This change allows for the rapid removal of water vapor at temperatures well below the damage threshold of the board. The elimination of moisture prevents the expansion of steam within the internal layers when the board is heated to lead-free reflow temperatures.
This extraction protects the integrity of multi-layer vias from micro-cracking.
Material Recovery
Restoring the laminate to its original dry condition ensures that its electrical and mechanical properties are fully recovered. Boards that would otherwise be scrapped due to excessive humidity exposure can be safely returned to the assembly line after this treatment. This recovery reduces material waste and lowers the total cost of high-value prototype runs.