Ceramic Dielectric
Inorganic ferroelectric compounds provide the high relative permittivity required for high-density ceramic capacitors on printed circuit boards. Synthesized from titanium dioxide and barium carbonate, barium titanate forms a perovskite crystal structure that exhibits relative permittivity values exceeding two thousand at room temperature. This crystal matrix changes phase near one hundred and twenty degrees Celsius, where Curie temperature transitions shift the dielectric constant sharply.
Below this Curie point, domain wall displacement under applied electric fields yields substantial capacitance per unit volume. The material performance limits apply when operating frequencies enter the gigahertz spectrum or ambient temperatures exceed rated dielectric boundaries.
Voltage Coefficient
Applied direct current bias reduces the effective permittivity of high dielectric constant ceramics through domain pinning. When a bias field acts across thin dielectric layers, barium titanate experiences a drop in capacitance that frequently exceeds fifty percent of nominal value at rated working voltage. Class two dielectric formulations incorporate dopants such as zirconium or manganese to smooth the temperature curve, yet direct current voltage sensitivity remains an intrinsic property of the underlying crystal lattice.
Designers must account for this derating during circuit simulation for power distribution networks. High alternating current ripple voltage also induces mechanical strain through electrostriction.
Crack Sensitivity
Brittle ceramic bodies suffer structural fracturing under mechanical shock or thermal stress during assembly reflow. Standard shear testing confirms bond strength, but internal sub-surface cracks across the ceramic block compromise insulation resistance over time.