Sheet Flexure
Mechanical drilling operations in printed circuit fabrication require a sacrificial top layer placed on the laminate stack to prevent burring and guide the drill bit. This phenomenon, known as entry sheet deflection, occurs when the sacrificial sheet bows or flexes upward when the descending drill makes first contact. This upward bowing of the thin aluminum or composite sheet creates an unstable starting surface that fails to support the drill bit tip properly.
If the entry sheet does not remain perfectly flat against the PCB stack, the lack of rigid support allows the drill bit to walk or skip across the surface before penetrating.
Inaccuracy Risk
Excessive flexing of this sacrificial layer leads directly to hole positioning errors across the entire multilayer circuit board. When the drill bit tip deflects due to the sheet’s upward movement, the resulting drill path is drilled at an angle rather than perpendicular to the board surface. This causes registration mismatch between the drilled hole and the internal copper layers, which diminishes the copper annular ring and increases the probability of electrical failure.
Tool Preservation
Minimizing this deflection requires the use of specialized clamping systems that apply uniform downward force across the entire stack surface during the drilling cycle. Choosing entry materials with the correct stiffness and thickness ensures that the drill tip penetrates without causing the sheet to bend. This flat surface prevents premature wear on the delicate carbide drill bits.