Structural Failure
The internal separation of resin and glass fiber layers within a printed circuit board caused by rapid, extreme temperature changes represents a critical reliability risk. This thermal shock delamination occurs during processes like hand soldering, wave soldering, or reflow when the board experiences a sudden thermal gradient. The rapid expansion of trapped moisture within the laminate is often the primary driver of this mechanical separation.
Material Susceptibility
Circuit boards with high moisture absorption rates or low glass transition temperatures are particularly vulnerable to internal fracturing under thermal stress. The risk of thermal shock delamination increases when boards are stored in humid environments without adequate desiccant or pre-baking. When the moisture is heated rapidly, it vaporizes and expands, creating internal pressure that exceeds the adhesive strength of the resin-glass interface.
Prevention Protocol
Baking the printed circuit boards before assembly at a controlled temperature drives out any absorbed moisture and minimizes the internal vapor pressure generated during soldering. This preventative measure is essential for multi-layer boards that are subjected to lead-free reflow profiles, which require higher temperatures and longer dwell times. Establishing a gradual ramp-up rate during preheating also reduces the thermal gradient, which prevents the sudden expansion that causes this internal separation.
Quality control teams must enforce these baking procedures for any boards that have been exposed to ambient humidity for extended periods, as this simple step dramatically reduces the occurrence of laminate failures during the reflow process.